ALTIC EPOXY THERMAL INSULATION GLASS COATING

Product Description

ALTIC Epoxy Thermal Insulation Glass Coating is a specialized industrial protective coating designed for applications where thermal insulation, surface protection, and epoxy-based coating performance are required. The coating can be used on suitable industrial surfaces to help manage heat transfer while providing a durable protective layer.

Its glass-reinforced/filled coating formulation is suitable for industrial environments where resistance to heat, moisture, chemicals, abrasion, and surface deterioration may be required, subject to the final system specification.

Key Features & Benefits

• Epoxy-based thermal insulation coating system
• Helps reduce heat transfer from coated surfaces
• Provides a protective barrier against environmental exposure
• Suitable for selected industrial applications
• Good adhesion when applied over properly prepared surfaces
• Helps protect substrates from moisture and surface deterioration
• Suitable for maintenance and new industrial coating projects
• Can be incorporated into a multilayer protective coating system where compatible

Typical Applications

ALTIC Epoxy Thermal Insulation Glass Coating may be considered for:

• Industrial pipelines
• Storage tanks and vessels
• Machinery and equipment
• Process equipment
• Metal structures
• Industrial plant surfaces
• Thermal processing equipment
• Areas requiring thermal insulation and protective coating
• Industrial maintenance and refurbishment projects

Suitable Surfaces

Depending on the specified coating system, it may be used on properly prepared:

• Mild steel (MS)
• Carbon steel
• Selected metal surfaces
• Industrial equipment
• Fabricated structures

Surface compatibility should always be confirmed before application.

Surface Preparation

Proper surface preparation is essential for coating performance.

1. Remove oil, grease, dust, dirt, rust, and loose contaminants.
2. Clean the substrate using a suitable industrial cleaning method.
3. Mechanically prepare or abrasive-blast the surface where specified.
4. Ensure the surface is dry and free from loose material.
5. Apply the recommended primer, if required by the coating system.
6. Follow the latest ALTIC TDS for the required surface preparation standard.

Application

Application may be carried out using a suitable brush, roller, or spray method, depending on the product formulation and project requirements.

For optimum results:

• Mix components thoroughly where a multi-component system is supplied.
• Follow the specified mixing ratio and induction time, if applicable.
• Apply the coating at the recommended film thickness.
• Allow adequate drying/curing between coats.
• Avoid application under unsuitable environmental conditions.
• Do not exceed the recommended coating thickness in a single coat.

Important Product Information

The exact thermal resistance, thermal conductivity/insulation performance, DFT, coverage, mixing ratio, curing time, application method, chemical resistance, and service conditions should be confirmed from the latest ALTIC Technical Data Sheet (TDS) and Safety Data Sheet (SDS) before commercial application.

Manufacturer: UGAM TECHNOLOGY
Brand: ALTIC Paint
Location: Vadodara, Gujarat, India
Application: Industrial Thermal Insulation & Protective Coating